Compact, light, versatile – the TruMicro Series 2000
Whether for structuring, ablating, cutting, or drilling: the laser has become an essential tool in micro-production technology. The fiber-based ultrashort pulse lasers in the TruMicro Series 2000 are distinguished by their compact and light design. Integrating the laser is made significantly easier by using a laser light cable for ultrashort pulse lasers (LLK-U).
With their moderate average power and versatile adjustable parameters they are ideally suited for foil cutting and precise structuring and marking, for example.
The laser light cable for ultrashort pulse lasers (LLK-U) facilitates machine integration without free-beam guidance.
Operate the TruMicro 2000 with different repetition rates, pulse energies, and pulse trains.
Advanced Pulse on Demand makes it possible to trigger laser pulses with trigger signals of varying frequency.
The TruMicro Series 2000 makes it possible to use cold processing for a large number of micro-processing applications.
Make use of the laser's strengths for corrosion-free black marking on metals.
High beam quality enables cutting, welding and marking of transparent materials
Cutting ultra-thin glass
Laser modification cutting allows ultra-thin glass (50 µm) to be cut with the highest edge quality. This significantly increases the rigidity.
Glass welding
TRUMPF TOP Weld optics focus femtosecond-long laser pulses to weld glass to glass or glass to metal with high precision. The result is a high-tensile and practically invisible bond.
Surface structuring
Ultrashort pulse lasers enable a variety of different processes. By varying the laser parameter set, metal surfaces can be cleaned, structured and engraved.
Cutting organic material
The combination of ultrashort durations with high intensity enables microprocessing with incomparable precision. Even highly sensitive organic material can be cut without damaged or burned edges.
Ablation of gold and ceramic
The TruMicro 2030 cuts and processes technical high-performance ceramics for power electronics and consumer electronics. Precise ablation creates conductive paths, replacing etching processes - an environmentally friendly advancement.
Cutting of printed circuit boards
With the green wavelength, you can process flexible printed circuit boards (FPC) for the electronics industry and medical technology. The laser guarantees quick and precise cutting, without a heat-affected zone. The best edge qualities are achieved, even with plastics.
Cutting and ablation of lumen tubes
The precise cutting and ablation of lumen tubes with ultrashort pulse lasers enables use in medical technology. The processing does not result in discoloration or melting of the cut edges or markings.
Invar cutting
The TruMicro series provides perfect cuts of complex geometries from wafer-thin films under 100 µm. These form the basis for efficient stator and rotor packages in electric motor production.
|
TruMicro 2030
|
TruMicro 2230
|
|
|---|---|---|
| Laser parameters | ||
| Average output power | 20 W | 10 W |
| Beam quality (M²) | < 1.2 | < 1.3 |
| Wavelength | 1030 nm | 515 nm |
| Pulse duration | < 350 fs - 20 ps | < 350 fs |
| Maximum pulse energy | 100 µJ | 40 µJ |
| Maximum repetition rate |
2000 kHz
QCW mode: 50000 kHz |
2000 kHz |
| Structural design | ||
| Dimensions of laser head (W x H x D) | 570 mm x 360 mm x 180 mm | 570 mm x 360 mm x 180 mm |
| Dimensions for basic device size (W x H x D) | 510 mm x 485 mm x 180 mm | 510 mm x 485 mm x 180 mm |
TruControl
TruControl is the quick and easy-to-use control for TRUMPF solid-state lasers. It regulates the laser power in real time in order to deliver reproducible results. TruControl manages, controls, and visualizes the interface configuration. You benefit from a uniform control architecture across all laser technologies. The lasers have interfaces to control intelligent TRUMPF optics, such as monitored CFO focusing optics or PFO scanner optics. You can easily program the processing optics via the laser control system. The remote support service provided by TRUMPF means that you receive off-site support within seconds. This will allow you to avoid service calls or be as prepared as possible and increase the availability of the laser device.
With the useful options of the TruMicro Series 2000 lasers you can work more efficiently and with more process reliability.
Forego elaborate free-beam guidance and significantly simplify the machine design: instead of the free-beam guidance, the laser pulses are guided through the hollow core fibers from the laser source to the optics. The laser can be integrated in the processing machine much more flexibly thanks to this thermal and mechanical decoupling between the TRUMPF laser and the corresponding optics. The beam and pulse properties remain unaffected.
Have your laser monitored by our TRUMPF experts and algorithms. We contact you proactively at the first signs of anything unusual. This avoids unplanned downtimes in your production.
If complex geometries are processed with scanners, for example when cutting polymer films, the acceleration and brake paths of the scanner lead to varying spatial intervals of the ultrashort laser pulses on the material. This means that the processing quality depends on the processing geometry. On the other hand, the repetition rate is adapted to the scan speed with the "Flexible Pulse on Demand" option, facilitating constant pulse intervals. This not only means that the process result is independent of the processing contour, but that the process time is decreased as well.
TRUMPF offers you all the components you need for beam guidance from the laser to the workpiece. This also applies for various focusing optics which have proven themselves to be precise and reliable over many years of industrial use. The optics can be easily integrated – both in stand-alone processing stations as well as in complete production lines. The modular structure enables the optics to be continually adapted to the laser types and various processing situations.
TOP Cleave cutting optics
The TOP Cleave-2 PRO focusing optics are processing optics for high-dynamic cutting of transparent materials, such as glass or sapphire.
TOP Weld processing optics
The innovative processing optics for welding transparent materials without intermediate layers.
Scanner
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
Find your perfect pulsed laser now!
Use the product finder to discover which pulsed laser is best suited to your application!
